I've been trying to get KaOS installed properly for a couple of weeks and I am, unfortunately, about to give up and go back to Mint.
I followed the instructions under GPT partitioning (https://kaosx.us/docs/bios_gpt/). Looking at sda in the partition manager, it appears to be set up properly. I installed KaOS manually this time and created a separate home partition, and everything installed fine.
However, when I boot, I get "Invalid Partition Table". If I hit enter, it continues to boot and load properly, albeit a bit slowly. Looking at partition manager after install, Calimares converted the xfs root partition I created to ext4 and then installed.???
I have installed KaOS several times. In earlier installs I noticed something odd. When I used the automatic install option , it worked great, but Calimares creates a msdos partition table, even if I set sda as a gpt table beforehand. Could this be a hardware issue?
SYSTEM INFORMATION
Operating System: KaOS (2020)
KDE Plasma Version: 5.19.3
KDE Frameworks Version: 5.72.0
Qt Version: 5.15.0
Kernel Version: 5.7.8-1
OS Type: 64-bit
Processors: 4 × Intel® Core™ i5-3340M CPU @ 2.70GHz
Memory: 3.8 GiB of RAM
Graphics Processor: Mesa DRI Intel® HD Graphics 4000
Machine: Type: Laptop System: Dell product: Latitude E5530 non-vPro v: 01 serial: <filter>
Chassis: type: 9 serial: <filter>
Mobo: Dell model: 05GRXT v: A00 serial: <filter> BIOS: Dell v: A21 date: 11/30/2018
Battery: ID-1: BAT0 charge: 55.6 Wh condition: 55.6/57.7 Wh (96%) volts: 12.6/11.1
model: SMP DELL P8TC721 serial: <filter> status: Full
CPU: Topology: Dual Core model: Intel Core i5-3340M bits: 64 type: MT MCP arch: Ivy Bridge
rev: 9 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 21529
Speed: 3190 MHz min/max: 1200/3400 MHz Core speeds (MHz): 1: 3190 2: 3189 3: 3190
4: 3383
Graphics: Device-1: Intel 3rd Gen Core processor Graphics vendor: Dell driver: i915 v: kernel
bus ID: 00:02.0 chip ID: 8086:0166
Display: x11 server: X.Org 1.20.4 driver: modesetting unloaded: fbdev,vesa
resolution: 1366x76860Hz
OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile v: 4.2 Mesa 19.0.8 compat-v: 3.0
direct render: Yes
Audio: Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:1e20
Sound Server: ALSA v: k5.0.0-32-generic
Network: Device-1: Broadcom and subsidiaries BCM43228 802.11a/b/g/n vendor: Dell
driver: bcma-pci-bridge v: N/A port: f040 bus ID: 02:00.0 chip ID: 14e4:4359
Device-2: Broadcom and subsidiaries NetXtreme BCM5761 Gigabit Ethernet PCIe
vendor: Dell driver: tg3 v: 3.137 port: f040 bus ID: 0c:00.0 chip ID: 14e4:1681
IF: enp12s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 510.11 GiB used: 6.48 GiB (1.3%)
ID-1: /dev/sda vendor: Toshiba model: MK5061GSYN size: 465.76 GiB speed: 3.0 Gb/s
serial: <filter> temp: 46 C
ID-2: /dev/sdb type: USB vendor: Lexar model: USB Flash Drive size: 29.81 GiB
serial: <filter>
ID-3: /dev/sdc type: USB model: USB Flash Memory size: 14.54 GiB serial: <filter>
RAID: Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0
bus ID: 00:1f.2 chip ID: 8086.282a
Partition: ID-1: / size: 1.88 GiB used: 61.1 MiB (3.2%) fs: overlay source: ERR-102
USB: Hub: 1-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 chip ID: 1d6b:0002
Hub: 1-1:2 info: Intel Integrated Rate Matching Hub ports: 6 rev: 2.0
chip ID: 8087:0024
Device-1: 1-1.2:3 info: Toshiba Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB /
PNY Attache 4GB Stick
type: Mass Storage driver: usb-storage rev: 2.0 chip ID: 0930:6545
Hub: 2-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0 chip ID: 1d6b:0002
Hub: 2-1:2 info: Intel Integrated Rate Matching Hub ports: 8 rev: 2.0
chip ID: 8087:0024
Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 chip ID: 1d6b:0002
Device-2: 3-1:2 info: Logitech Unifying Receiver type: Mouse,HID
driver: hid-generic,usbhid rev: 2.0 chip ID: 046d:c52f
Device-3: 3-2:3 info: Lexar Media type: Mass Storage driver: usb-storage rev: 2.0
chip ID: 05dc:c75c
Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 chip ID: 1d6b:0003
Sensors: System Temperatures: cpu: 52.0 C mobo: 43.0 C sodimm: 39.0 C
Fan Speeds (RPM): cpu: 3212