demm

Hi demm, thanks for your answer. Unfortunately, Octopi is not working properly. When I go to Tools->SysInfo, it returns an error message saying that internet is not available. Honestly, it never worked, and I did´t care, since I always run pacman commands from a terminal. Is there another way to obtain an equivalent of Octopi's sysinfo? In case it helps, I paste below the content of pacman.log corresponding to the last two updates (there was no restart between them, so I guess any one of them could be the cause of the problem). In particular, there is an upgrade for mesa (23.1.3-1 -> 23.1.4-1).

Going back to Octopi: I think that the problem is that this PC is behind a proxy. The proxy is correctly configured via the preferences&settings GUI and Internet works fine (the browser, the mail client, running pacman, ping, git, etc. in a terminal...). But Octopi was never able to sync the mirrors. Today, I tried to fix it. I created a file /etc/profile.d/proxy.sh, where I defined the variables http_proxy, https_proxy, ftp_proxy and ssl_proxy. Now Octopi can sync the mirrors. However, both Tools->SysInfo and File->Update return the same error message saying that Internet is not available. Any ideas?

Thanks for your help!

/var/log/pacman.log

[2023-07-31T08:23:09-0300] [PACMAN] Running 'pacman -Syu'
[2023-07-31T08:23:09-0300] [PACMAN] synchronizing package lists
[2023-07-31T08:23:11-0300] [PACMAN] starting full system upgrade
[2023-07-31T08:29:29-0300] [ALPM] transaction started
[2023-07-31T08:29:29-0300] [ALPM] upgraded libarchive (3.6.2-2 -> 3.7.0-1)
[2023-07-31T08:29:29-0300] [ALPM] upgraded unrar (6.2.8-1 -> 6.2.9-1)
[2023-07-31T08:29:30-0300] [ALPM] upgraded systemd (1:253.6-1 -> 1:253.7-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded libunwind (1.7.0-1 -> 1.7.1-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded mesa (23.1.3-1 -> 23.1.4-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded tar (1.34-5 -> 1.35-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded mpfr (4.2.0.p9-1 -> 4.2.0.p12-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded gstreamer (1.22.4-1 -> 1.22.5-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded gst-plugins-base (1.22.4-1 -> 1.22.5-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded tdb (1.4.8-1 -> 1.4.9-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded eigen3 (3.4.0-1 -> 3.4.0-2)
[2023-07-31T08:29:31-0300] [ALPM] upgraded avisynthplus (3.7.2-1 -> 3.7.3-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded librsvg (2.56.2-1 -> 2.56.3-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded vulkan-loader (1.3.257-1 -> 1.3.258-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded talloc (2.4.0-1 -> 2.4.1-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded tevent (0.14.1-1 -> 0.15.0-1)
[2023-07-31T08:29:31-0300] [ALPM] upgraded ldb (2:2.7.2-1 -> 2:2.7.2-2)
[2023-07-31T08:29:32-0300] [ALPM] upgraded samba (4.18.4-2 -> 4.18.5-2)
[2023-07-31T08:29:32-0300] [ALPM] upgraded glu (9.0.2-1 -> 9.0.3-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded gst-plugins-good (1.22.4-1 -> 1.22.5-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded nghttp2 (1.54.0-1 -> 1.55.1-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded pipewire (0.3.74-1 -> 0.3.75-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded vulkan-headers (1.3.257-1 -> 1.3.258-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded gst-plugins-bad (1.22.4-1 -> 1.22.5-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded qca-qt5 (2.3.6-1 -> 2.3.7-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded libblockdev (3.0.1-1 -> 3.0.2-1)
[2023-07-31T08:29:32-0300] [ALPM] upgraded ark (23.04.3-1 -> 23.04.3-2)
[2023-07-31T08:29:32-0300] [ALPM] upgraded jsoncpp (1.9.5-1 -> 1.9.5-2)
[2023-07-31T08:29:39-0300] [ALPM] upgraded cmake (3.26.4-1 -> 3.27.0-1)
[2023-07-31T08:29:39-0300] [ALPM] upgraded dhcpcd (10.0.1-1 -> 10.0.2-1)
[2023-07-31T08:29:39-0300] [ALPM] upgraded dnsutils (9.18.16-1 -> 9.18.17-1)
[2023-07-31T08:29:40-0300] [ALPM] upgraded dracut (059-1 -> 059-2)
[2023-07-31T08:29:40-0300] [ALPM] upgraded gst-libav (1.22.4-1 -> 1.22.5-1)
[2023-07-31T08:29:40-0300] [ALPM] upgraded firefox (115.0.2-1 -> 115.0.3-1)
[2023-07-31T08:29:40-0300] [ALPM] installed abseil-cpp (20230125.3-1)
[2023-07-31T08:29:40-0300] [ALPM] upgraded protobuf (21.12-1 -> 23.4-1)
[2023-07-31T08:29:40-0300] [ALPM] upgraded protobuf-c (1.4.1-1 -> 1.4.1-2)
[2023-07-31T08:29:40-0300] [ALPM] upgraded fwupd (1.9.3-1 -> 1.9.3-2)
[2023-07-31T08:29:41-0300] [ALPM] upgraded gdb (13.2-2 -> 13.2-3)
[2023-07-31T08:29:41-0300] [ALPM] upgraded hwinfo (23.1-1 -> 23.2-1)
[2023-07-31T08:29:41-0300] [ALPM] upgraded imagemagick (7.1.1.12-2 -> 7.1.1.14-1)
[2023-07-31T08:29:43-0300] [ALPM] upgraded qt6-base (6.5.1-2 -> 6.5.2-1)
[2023-07-31T08:29:43-0300] [ALPM] upgraded python3-cython (0.29.36-1 -> 3.0.0-1)
[2023-07-31T08:29:49-0300] [ALPM] upgraded inkscape (1.2.2-6 -> 1.3-1)
[2023-07-31T08:29:49-0300] [ALPM] upgraded kirigami-addons (0.9.0-1 -> 0.10.0-1)
[2023-07-31T08:29:49-0300] [ALPM] upgraded libappimage (1.0.4.5-4 -> 1.0.4.5-5)
[2023-07-31T08:29:49-0300] [ALPM] upgraded mkinitcpio (26-6 -> 26-7)
[2023-07-31T08:29:49-0300] [ALPM] upgraded mpv (0.35.1-2 -> 0.36.0-1)
[2023-07-31T08:29:53-0300] [ALPM] upgraded nodejs (20.4.0-2 -> 20.5.0-1)
[2023-07-31T08:29:53-0300] [ALPM] upgraded openssh (9.3p1-2 -> 9.3p2-1)
[2023-07-31T08:29:54-0300] [ALPM] upgraded pacman (6.0.2-3 -> 6.0.2-4)
[2023-07-31T08:29:54-0300] [ALPM] upgraded pkgfile (21-5 -> 21-6)
[2023-07-31T08:29:54-0300] [ALPM-SCRIPTLET] ==> Run 'pkgfile --update' to initialize the database
[2023-07-31T08:29:54-0300] [ALPM] upgraded pyqt5-sip (12.12.1-1 -> 12.12.2-1)
[2023-07-31T08:29:54-0300] [ALPM] upgraded python3-certifi (2023.5.7-1 -> 2023.7.22-1)
[2023-07-31T08:29:54-0300] [ALPM] upgraded python3-pip (23.1.2-1 -> 23.2.1-1)
[2023-07-31T08:29:55-0300] [ALPM] upgraded python3-sphinx (7.0.1-1 -> 7.1.0-1)
[2023-07-31T08:29:55-0300] [ALPM] upgraded python3-wheel (0.40.0-1 -> 0.41.0-1)
[2023-07-31T08:29:55-0300] [ALPM] upgraded pyyaml (6.0-3 -> 6.0.1-1)
[2023-07-31T08:29:55-0300] [ALPM] upgraded qt6-shadertools (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:29:55-0300] [ALPM] upgraded qt6-languageserver (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-declarative (6.5.1-2 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-5compat (6.5.1-2 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-serialport (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-positioning (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-svg (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-websockets (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:29:58-0300] [ALPM] upgraded qt6-webchannel (6.5.1-1 -> 6.5.2-1)
[2023-07-31T08:30:07-0300] [ALPM] upgraded qt6-webengine (6.5.1-2 -> 6.5.2-1)
[2023-07-31T08:30:07-0300] [ALPM] upgraded xxhash (0.8.1-1 -> 0.8.2-1)
[2023-07-31T08:30:07-0300] [ALPM] upgraded rsync (3.2.7-3 -> 3.2.7-4)
[2023-07-31T08:30:07-0300] [ALPM] upgraded sip (6.7.9-1 -> 6.7.10-1)
[2023-07-31T08:30:07-0300] [ALPM] upgraded sudo (1.9.14.p1-1 -> 1.9.14.p2-1)
[2023-07-31T08:30:07-0300] [ALPM] upgraded vulkan-tools (1.3.257-1 -> 1.3.258-1)
[2023-07-31T08:30:08-0300] [ALPM] upgraded widevine (116.0.5845.32-1 -> 117.0.5911.2-1)
[2023-07-31T08:30:09-0300] [ALPM] upgraded xfsprogs (6.3.0-1 -> 6.4.0-1)
[2023-07-31T08:30:09-0300] [ALPM] upgraded xorg-apps (7.17-4 -> 7.17-5)
[2023-07-31T08:30:10-0300] [ALPM] transaction completed
[2023-07-31T08:30:10-0300] [ALPM] running '99-linux.hook'...
[2023-07-31T08:30:10-0300] [ALPM-SCRIPTLET] :: Building initramfs for linux-6.3.12-1
[2023-07-31T08:30:11-0300] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut -f --no-hostonly-cmdline /boot/initramfs-linux.img --kver 6.3.12-1
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-07-31T08:30:13-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2023-07-31T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2023-07-31T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2023-07-31T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2023-07-31T08:30:19-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2023-07-31T08:30:24-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2023-07-31T08:30:24-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Files:                    714
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Linked:                   2 files
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Compared:                 17 files
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Saved:                    698 B
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: Duration:                 0.113091 seconds
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2023-07-31T08:30:28-0300] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2023-07-31T08:30:29-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2023-07-31T08:30:29-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2023-07-31T08:30:29-0300] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux.img' ***
[2023-07-31T08:30:35-0300] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux.img' done ***
[2023-07-31T08:30:35-0300] [ALPM-SCRIPTLET] :: Building initramfs for linux-fallback
[2023-07-31T08:30:35-0300] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut -f --no-hostonly --no-hostonly-cmdline /boot/initramfs-linux-fallback.img --kver 6.3.12-1
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2023-07-31T08:30:36-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2023-07-31T08:30:37-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2023-07-31T08:30:55-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2023-07-31T08:30:59-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2023-07-31T08:30:59-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2023-07-31T08:31:01-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2023-07-31T08:31:01-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Files:                    2160
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Linked:                   9 files
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Compared:                 476 files
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Saved:                    1.37 MiB
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: Duration:                 0.722421 seconds
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2023-07-31T08:31:02-0300] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-fallback.img' ***
[2023-07-31T08:31:08-0300] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-fallback.img' done ***
[2023-07-31T08:31:08-0300] [ALPM] running 'gdk-pixbuf-query-loaders.hook'...
[2023-07-31T08:31:09-0300] [ALPM] running 'gtk-update-icon-cache.hook'...
[2023-07-31T08:31:09-0300] [ALPM] running 'systemd-tmpfiles.hook'...
[2023-07-31T08:31:09-0300] [ALPM] running 'texinfo-install.hook'...
[2023-07-31T08:31:09-0300] [ALPM] running 'update-desktop-database.hook'...
[2023-07-31T08:31:09-0300] [ALPM] running 'update-mime-database.hook'...

[2023-08-03T08:23:55-0300] [PACMAN] Running 'pacman -Syu'
[2023-08-03T08:23:55-0300] [PACMAN] synchronizing package lists
[2023-08-03T08:23:56-0300] [PACMAN] starting full system upgrade
[2023-08-03T08:29:12-0300] [ALPM] transaction started
[2023-08-03T08:29:12-0300] [ALPM] warning: directory permissions differ on /etc/polkit-1/rules.d/
filesystem: 755  package: 750
[2023-08-03T08:29:12-0300] [ALPM] warning: directory permissions differ on /usr/share/polkit-1/rules.d/
filesystem: 700  package: 755
[2023-08-03T08:29:12-0300] [ALPM] upgraded polkit (122-1 -> 123-1)
[2023-08-03T08:29:13-0300] [ALPM] upgraded curl (8.1.2-1 -> 8.2.1-1)
[2023-08-03T08:29:13-0300] [ALPM] upgraded vulkan-loader (1.3.258-1 -> 1.3.259-1)
[2023-08-03T08:29:13-0300] [ALPM] upgraded vulkan-headers (1.3.258-1 -> 1.3.260-1)
[2023-08-03T08:29:13-0300] [ALPM] upgraded vulkan-validationlayers (1.3.257-1 -> 1.3.259-1)
[2023-08-03T08:29:13-0300] [ALPM] upgraded pipewire (0.3.75-1 -> 0.3.76-1)
[2023-08-03T08:29:13-0300] [ALPM] upgraded nss (3.91-1 -> 3.92-1)
[2023-08-03T08:29:14-0300] [ALPM] upgraded btrfs-progs (6.3.2-1 -> 6.3.3-1)
[2023-08-03T08:29:14-0300] [ALPM] upgraded bluedevil (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:14-0300] [ALPM] upgraded kdecoration (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:14-0300] [ALPM] upgraded noto-fonts (1:23.7.1-1 -> 1:23.8.1-1)
[2023-08-03T08:29:14-0300] [ALPM-SCRIPTLET] Updating font cache... done.
[2023-08-03T08:29:14-0300] [ALPM] upgraded breeze (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:14-0300] [ALPM] upgraded breeze-gtk (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:14-0300] [ALPM] upgraded cfitsio (4.2.0-1 -> 4.3.0-1)
[2023-08-03T08:29:15-0300] [ALPM] upgraded cmake (3.27.0-1 -> 3.27.1-1)
[2023-08-03T08:29:15-0300] [ALPM] upgraded drkonqi (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:15-0300] [ALPM] upgraded file (5.44-1 -> 5.45-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded firefox (115.0.3-1 -> 116.0-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded kactivitymanagerd (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded layer-shell-qt (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded libkscreen (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded kscreenlocker (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded kwin (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded libksysguard (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded milou (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded sddm-kcm (1:5.27.6-1 -> 1:5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded kwayland-integration (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:16-0300] [ALPM] upgraded kpipewire (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:17-0300] [ALPM] upgraded plasma-workspace (5.27.6-2 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kde-cli-tools (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kde-gtk-config (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kdeplasma-addons (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded khotkeys (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded systemsettings (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded vulkan-tools (1.3.258-1 -> 1.3.259-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kinfocenter (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kmenuedit (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kscreen (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded ksshaskpass (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded ksystemstats (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded kwallet-pam (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded libpaper (1.1.28-2 -> 1.1.29-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded oxygen-sounds (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded polkit-kde-agent-1 (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded powerdevil (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:18-0300] [ALPM] upgraded plasma-integration (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-desktop (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-disks (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-firewall (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-nm (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-pa (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-systemmonitor (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:19-0300] [ALPM] upgraded plasma-workspace-wallpapers (5.27.6-1 -> 5.27.7-1)
[2023-08-03T08:29:38-0300] [ALPM] upgraded python3-sphinx (7.1.0-1 -> 7.1.1-1)
[2023-08-03T08:29:38-0300] [ALPM] upgraded rubberband (3.2.1-1 -> 3.3.0-1)
[2023-08-03T08:29:38-0300] [ALPM] upgraded sudo (1.9.14.p2-1 -> 1.9.14.p3-1)
[2023-08-03T08:29:38-0300] [ALPM] upgraded translate-toolkit (3.9.2-1 -> 3.10.0-1)
[2023-08-03T08:29:40-0300] [ALPM] transaction completed
[2023-08-03T08:29:41-0300] [ALPM] running '99-linux.hook'...
[2023-08-03T08:29:41-0300] [ALPM-SCRIPTLET] :: Building initramfs for linux-6.3.12-1
[2023-08-03T08:29:43-0300] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut -f --no-hostonly-cmdline /boot/initramfs-linux.img --kver 6.3.12-1
[2023-08-03T08:29:44-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-08-03T08:29:44-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-08-03T08:29:44-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-08-03T08:29:45-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-08-03T08:29:45-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-08-03T08:29:45-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-08-03T08:29:45-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-08-03T08:29:45-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-08-03T08:29:46-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2023-08-03T08:29:47-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2023-08-03T08:29:47-0300] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2023-08-03T08:29:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2023-08-03T08:29:56-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2023-08-03T08:29:57-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2023-08-03T08:30:01-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2023-08-03T08:30:01-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Files:                    714
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Linked:                   2 files
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Compared:                 17 files
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Saved:                    698 B
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: Duration:                 0.196321 seconds
[2023-08-03T08:30:05-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2023-08-03T08:30:06-0300] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2023-08-03T08:30:07-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2023-08-03T08:30:07-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2023-08-03T08:30:07-0300] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux.img' ***
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux.img' done ***
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] :: Building initramfs for linux-fallback
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut -f --no-hostonly --no-hostonly-cmdline /boot/initramfs-linux-fallback.img --kver 6.3.12-1
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-08-03T08:30:13-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2023-08-03T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2023-08-03T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2023-08-03T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2023-08-03T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2023-08-03T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2023-08-03T08:30:14-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2023-08-03T08:30:15-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2023-08-03T08:30:15-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2023-08-03T08:30:15-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2023-08-03T08:30:16-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2023-08-03T08:30:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2023-08-03T08:30:50-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2023-08-03T08:30:57-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2023-08-03T08:30:57-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2023-08-03T08:30:59-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2023-08-03T08:30:59-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Files:                    2160
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Linked:                   9 files
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Compared:                 476 files
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Saved:                    1.37 MiB
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: Duration:                 0.793684 seconds
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2023-08-03T08:31:00-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2023-08-03T08:31:01-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2023-08-03T08:31:01-0300] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-fallback.img' ***
[2023-08-03T08:31:08-0300] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-fallback.img' done ***
[2023-08-03T08:31:08-0300] [ALPM] running 'fc-cache-install.hook'...
[2023-08-03T08:31:08-0300] [ALPM] running 'gtk-update-icon-cache.hook'...
[2023-08-03T08:31:08-0300] [ALPM] running 'systemd-tmpfiles.hook'...
[2023-08-03T08:31:08-0300] [ALPM] running 'update-desktop-database.hook'...
[2023-08-03T08:31:08-0300] [ALPM] running 'update-mime-database.hook'...
[2023-08-03T08:33:15-0300] [PACMAN] Running 'pacman -S helix'
[2023-08-03T08:36:30-0300] [PACMAN] Running 'pacman -S flatpak'
[2023-08-03T08:36:41-0300] [ALPM] transaction started
[2023-08-03T08:36:41-0300] [ALPM] installed bubblewrap (0.8.0-1)
[2023-08-03T08:36:41-0300] [ALPM] installed ostree (2023.5-2)
[2023-08-03T08:36:41-0300] [ALPM] installed appstream (0.16.2-2)
[2023-08-03T08:36:41-0300] [ALPM] installed xdg-desktop-portal (1.16.0-1)
[2023-08-03T08:36:41-0300] [ALPM] installed xdg-desktop-portal-kde (5.27.7-1)
[2023-08-03T08:36:41-0300] [ALPM] installed flatpak (1.14.4-3)
[2023-08-03T08:36:42-0300] [ALPM-SCRIPTLET] QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
[2023-08-03T08:36:42-0300] [ALPM-SCRIPTLET] QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
[2023-08-03T08:37:45-0300] [ALPM-SCRIPTLET] QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
[2023-08-03T08:37:45-0300] [ALPM-SCRIPTLET] QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
[2023-08-03T08:37:47-0300] [ALPM] transaction completed
[2023-08-03T08:37:47-0300] [ALPM] running '99-linux.hook'...
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] :: Building initramfs for linux-6.3.12-1
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut -f --no-hostonly-cmdline /boot/initramfs-linux.img --kver 6.3.12-1
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-08-03T08:37:47-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2023-08-03T08:37:48-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: ostree ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2023-08-03T08:37:49-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2023-08-03T08:37:50-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2023-08-03T08:37:50-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2023-08-03T08:37:51-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2023-08-03T08:37:51-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Files:                    717
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Linked:                   2 files
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Compared:                 17 files
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Saved:                    698 B
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: Duration:                 0.072581 seconds
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2023-08-03T08:37:52-0300] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux.img' ***
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux.img' done ***
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] :: Building initramfs for linux-fallback
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut -f --no-hostonly --no-hostonly-cmdline /boot/initramfs-linux-fallback.img --kver 6.3.12-1
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: dracut module 'pcsc' will not be installed, because command 'pcscd' could not be found!
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2023-08-03T08:37:56-0300] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2023-08-03T08:37:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2023-08-03T08:37:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2023-08-03T08:37:57-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2023-08-03T08:37:57-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2023-08-03T08:37:57-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2023-08-03T08:37:57-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2023-08-03T08:37:58-0300] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Including module: ostree ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2023-08-03T08:37:59-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2023-08-03T08:38:03-0300] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2023-08-03T08:38:03-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2023-08-03T08:38:04-0300] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2023-08-03T08:38:04-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Files:                    2162
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Linked:                   9 files
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Compared:                 476 files
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Saved:                    1.37 MiB
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: Duration:                 0.707415 seconds
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2023-08-03T08:38:05-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2023-08-03T08:38:06-0300] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2023-08-03T08:38:06-0300] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-fallback.img' ***
[2023-08-03T08:38:11-0300] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-fallback.img' done ***
[2023-08-03T08:38:11-0300] [ALPM] running 'appstream.hook'...
[2023-08-03T08:38:12-0300] [ALPM-SCRIPTLET] ✔ Se actualizó la antememoria de metadatos correctamente.
[2023-08-03T08:38:12-0300] [ALPM] running 'systemd-tmpfiles.hook'...
[2023-08-03T08:38:12-0300] [ALPM] running 'update-desktop-database.hook'...

    Mesa is not the issue, a minor update like that does not change supported hardware, it could have been the issue if the update was from 3.0.x to 3.1.x. Kernel or intel drivers were not updated either, so it almost looks like a user specific setting/change caused the issue.
    Further things SysInfo would have given, please run those manually (installation.log is the other, not needed yet):

    pacman -Qm
    sudo journalctl -b -p err

    Can you replicate the issue with a new, clean user? Tried logging into an X session instead of Wayland?

    PS:
    Please use code tags (enclose with 3 backticks ```) for any cli output, done for you these last 2 times.

      demm

      The issue persists with a clean user, and with an X11 session. The only difference being that in X11 the output of xrandr is reduced to the four options that are shown in systemsettings->Screen & Monitor->drop down (for both users).

      The output of pacman -Qm:

      curl-kcp 7.85.0-1
sip3 4.19.25-4
vivaldi 5.5.2805.44-1
vscode 1.72.2-1
zoom 5.14.7.2928-1

      The output of sudo journalctl -b -p err:

      ago 04 09:15:00 iojea-PC kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_NOT_FOUND) (20221020/psparse-529)
ago 04 09:15:09 iojea-PC systemd-udevd[304]: /etc/udev/rules.d/40-libsane.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
ago 04 09:15:10 iojea-PC systemd-udevd[304]: /etc/udev/rules.d/S99-2000S1.rules:26: GOTO="libsane_rules_end" has no matching label, ignoring
ago 04 09:15:28 iojea-PC colord-sane[472]: io/hpmud/musb.c 2100: Invalid usb_open: Permission denied
ago 04 09:15:28 iojea-PC colord-sane[472]: io/hpmud/musb.c 2100: Invalid usb_open: Permission denied
ago 04 09:15:28 iojea-PC colord-sane[472]: io/hpmud/musb.c 2100: Invalid usb_open: Permission denied
ago 04 09:15:28 iojea-PC colord-sane[472]: io/hpmud/musb.c 2100: Invalid usb_open: Permission denied
ago 04 09:15:45 iojea-PC systemd[560]: /run/user/1000/systemd/generator.late/app-xdg\x2duser\x2ddirs\x2dupdate@autostart.service:18: WorkingDirectory= path is not absolute, ignoring: 
ago 04 09:16:25 iojea-PC systemd[560]: Failed to start Splash screen shown during boot.
ago 04 09:19:13 iojea-PC konsole[1178]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 09:19:13 iojea-PC konsole[1178]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 09:24:00 iojea-PC konsole[1423]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 09:24:00 iojea-PC konsole[1423]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 09:44:55 iojea-PC konsole[1789]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 09:44:55 iojea-PC konsole[1789]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:01:57 iojea-PC konsole[2081]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:01:57 iojea-PC konsole[2081]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:09:22 iojea-PC konsole[2746]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:09:22 iojea-PC konsole[2746]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:11:10 iojea-PC konsole[2852]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:11:10 iojea-PC konsole[2852]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:39:26 iojea-PC konsole[3258]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:39:26 iojea-PC konsole[3258]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:41:43 iojea-PC systemd[560]: /run/user/1000/systemd/generator.late/app-xdg\x2duser\x2ddirs\x2dupdate@autostart.service:18: WorkingDirectory= path is not absolute, ignoring: 
ago 04 10:42:32 iojea-PC konsole[3856]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:42:32 iojea-PC konsole[3856]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:42:51 iojea-PC konsole[3904]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:42:51 iojea-PC konsole[3904]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:46:40 iojea-PC systemd[560]: /run/user/1000/systemd/generator.late/app-xdg\x2duser\x2ddirs\x2dupdate@autostart.service:18: WorkingDirectory= path is not absolute, ignoring: 
ago 04 10:51:24 iojea-PC konsole[5376]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:51:24 iojea-PC konsole[5376]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:52:58 iojea-PC systemd[560]: /run/user/1000/systemd/generator.late/app-xdg\x2duser\x2ddirs\x2dupdate@autostart.service:18: WorkingDirectory= path is not absolute, ignoring: 
ago 04 10:54:43 iojea-PC konsole[6532]: kf.xmlgui: Shortcut for action  "" "Mostrar las órdenes rápidas" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.
ago 04 10:54:43 iojea-PC konsole[6532]: kf.xmlgui: Shortcut for action  "" "Mostrar el gestor de SSH" set with QAction::setShortcut()! Use KActionCollection::setDefaultShortcut(s) instead.```

        I forgot one more from SysInfo, seeing which repo's are in use, please post the contents of /etc/pacman.conf
        journal errors give no clue either.

        Content of /etc/pacman.conf:

        #
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
#HookDir     = /etc/pacman.d/hooks/
HoldPkg     = pacman glibc
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
#CleanMethod = KeepInstalled
Architecture = auto

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg   =
#IgnoreGroup =

#NoUpgrade   =
#NoExtract   =

# Misc options (all disabled by default)
#UseSyslog
#ShowSize
Color
#NoProgressBar
CheckSpace
VerbosePkgLists
ILoveCandy
#ParallelDownloads = 5

# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Never
LocalFileSigLevel = Never
#RemoteFileSigLevel = Required

#
# REPOSITORIES
#   - can be defined here or included from another file
#   - pacman will search repositories in the order defined here
#   - local/custom mirrors can be added here or in separate files
#   - repositories listed first will take precedence when packages
#     have identical names, regardless of version number
#   - URLs will have $repo replaced by the name of the current repo
#   - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
#       [repo-name]
#       Server = ServerName
#       Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#

[core]
Include = /etc/pacman.d/mirrorlist

[main]
Include = /etc/pacman.d/mirrorlist

[apps]
Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs

        And content of /etc/pacman.d/mirrorlist:

        #
# KaOS repository mirrorlist
#

# Default mirror
# United States
Server = https://mirror.math.princeton.edu/pub/kaoslinux/$repo
Server = https://kaosx.yourhostingsolutions.com/$repo
Server = http://kaosx.tk/repo/$repo

# Germany
Server = http://mirrors.redcorelinux.org/kaosx/$repo
Server = https://mirror.alpix.eu/kaos/$repo

# Canada
Server = https://ca.kaosx.cf/$repo

# China
Server = https://mirrors.nju.edu.cn/kaos/$repo
Server = http://mirrors.nju.edu.cn/kaos/$repo
Server = https://mirrors.aliyun.com/KaOS/$repo
Server = http://mirrors.aliyun.com/KaOS/$repo

# Czech Republic
Server = https://mirror.234.cz/kaos/$repo

# France
Server = https://fr.kaosx.cf/$repo
Server = http://kaos.youm.org/$repo

# Iran
Server = https://mirror.bardia.tech/kaos/$repo

# Netherlands
Server = https://repo.kaosx.us/$repo

# Singapore
Server = https://mirror.freedif.org/KaOS/$repo

        iojea dri: crocus gpu: i915 resolution: 1024x768

        Nothing new, only indication of anything wrong is the first post with the above line, no idea yet why the cri crocus driver is limiting to 1024 all of a sudden.
        Just for debugging, it might help to to try and use mesa-amber, after installing reboot and run inxi -G, see if the dri driver gives a different resolution.
        Posting the /var/log/Xorg.0.log will be needed too. I doubt it is the case, but no clear indication yet, if the xf86-video-intel driver is installed.

            demm

            mesa-amber is installed, but according to the output of inxi -G, it is not being used:

            Graphics:
  Device-1: Intel IvyBridge GT2 [HD Graphics 4000] driver: i915 v: kernel
  Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.2
    compositor: kwin_wayland driver: X: loaded: modesetting unloaded: vesa
    dri: crocus gpu: i915 resolution: 1024x768
  API: OpenGL v: 4.2 Mesa 23.1.4 renderer: Mesa Intel HD Graphics 4000 (IVB
    GT2)

            Should I uninstall mesa?

            Content of Xorg.0.log:

            [    27.510] (--) Log file renamed from "/var/log/Xorg.pid-468.log" to "/var/log/Xorg.0.log"
[    27.646] 
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[    27.646] Current Operating System: Linux iojea-PC 6.3.12-1 #1 SMP PREEMPT_DYNAMIC Thu Jul  6 09:25:37 UTC 2023 x86_64
[    27.646] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=94962463-0e67-4769-b238-0c2da39f2f5d rw resume=UUID=4907ab03-b84a-4946-abd2-f9213f2c56ea quiet systemd.show_status=0
[    27.646]  
[    27.646] Current version of pixman: 0.42.2
[    27.646] 	Before reporting problems, check https://kaosx.us
	to make sure that you have the latest version.
[    27.646] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    27.646] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug  4 12:33:58 2023
[    27.718] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    27.718] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    27.827] (==) No Layout section.  Using the first Screen section.
[    27.827] (==) No screen section available. Using defaults.
[    27.827] (**) |-->Screen "Default Screen Section" (0)
[    27.827] (**) |   |-->Monitor "<default monitor>"
[    27.827] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    27.827] (==) Automatically adding devices
[    27.827] (==) Automatically enabling devices
[    27.827] (==) Automatically adding GPU devices
[    27.827] (==) Automatically binding GPU devices
[    27.827] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    27.906] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[    27.906] 	Entry deleted from font path.
[    27.906] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF").
[    27.906] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    27.906] 	Entry deleted from font path.
[    28.137] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    28.137] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.137] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.160] (II) Module ABI versions:
[    28.160] 	X.Org ANSI C Emulation: 0.4
[    28.160] 	X.Org Video Driver: 25.2
[    28.160] 	X.Org XInput driver : 24.4
[    28.160] 	X.Org Server Extension : 10.0
[    28.162] (++) using VT number 2

[    28.162] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    28.163] (II) xfree86: Adding drm device (/dev/dri/card0)
[    28.163] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    28.181] (--) PCI:*(0@0:2:0) 8086:0162:1849:0162 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    28.181] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    28.181] (II) LoadModule: "glx"
[    28.288] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.786] (II) Module glx: vendor="X.Org Foundation"
[    28.786] 	compiled for 1.21.1.8, module version = 1.0.0
[    28.786] 	ABI class: X.Org Server Extension, version 10.0
[    28.786] (==) Matched intel as autoconfigured driver 0
[    28.786] (==) Matched modesetting as autoconfigured driver 1
[    28.786] (==) Matched fbdev as autoconfigured driver 2
[    28.786] (==) Matched vesa as autoconfigured driver 3
[    28.786] (==) Assigned the driver to the xf86ConfigLayout
[    28.786] (II) LoadModule: "intel"
[    28.841] (WW) Warning, couldn't open module intel
[    28.841] (EE) Failed to load module "intel" (module does not exist, 0)
[    28.841] (II) LoadModule: "modesetting"
[    28.841] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    29.082] (II) Module modesetting: vendor="X.Org Foundation"
[    29.082] 	compiled for 1.21.1.8, module version = 1.21.1
[    29.082] 	Module class: X.Org Video Driver
[    29.082] 	ABI class: X.Org Video Driver, version 25.2
[    29.082] (II) LoadModule: "fbdev"
[    29.082] (WW) Warning, couldn't open module fbdev
[    29.082] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    29.082] (II) LoadModule: "vesa"
[    29.083] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.114] (II) Module vesa: vendor="X.Org Foundation"
[    29.114] 	compiled for 1.21.1.4, module version = 2.6.0
[    29.114] 	Module class: X.Org Video Driver
[    29.114] 	ABI class: X.Org Video Driver, version 25.2
[    29.114] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    29.114] (II) VESA: driver for VESA chipsets: vesa
[    29.132] (II) modeset(0): using drv /dev/dri/card0
[    29.132] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    29.132] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    29.132] (==) modeset(0): RGB weight 888
[    29.132] (==) modeset(0): Default visual is TrueColor
[    29.132] (II) Loading sub module "glamoregl"
[    29.132] (II) LoadModule: "glamoregl"
[    29.132] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    29.325] (II) Module glamoregl: vendor="X.Org Foundation"
[    29.325] 	compiled for 1.21.1.8, module version = 1.0.1
[    29.325] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.633] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics 4000 (IVB GT2)
[    32.633] (II) modeset(0): glamor initialized
[    32.633] (==) modeset(0): VariableRefresh: disabled
[    32.633] (==) modeset(0): AsyncFlipSecondaries: disabled
[    32.717] (II) modeset(0): Output VGA-1 has no monitor section
[    32.801] (II) modeset(0): EDID for output VGA-1
[    32.801] (II) modeset(0): Printing probed modes for output VGA-1
[    32.801] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    32.801] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    32.801] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    32.801] (II) modeset(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz e)
[    32.801] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    32.801] (II) modeset(0): Output VGA-1 connected
[    32.801] (II) modeset(0): Using exact sizes for initial modes
[    32.801] (II) modeset(0): Output VGA-1 using initial mode 1024x768 +0+0
[    32.801] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    32.801] (==) modeset(0): DPI set to (96, 96)
[    32.801] (II) Loading sub module "fb"
[    32.801] (II) LoadModule: "fb"
[    32.801] (II) Module "fb" already built-in
[    32.801] (II) UnloadModule: "vesa"
[    32.801] (II) Unloading vesa
[    33.207] (==) modeset(0): Backing store enabled
[    33.207] (==) modeset(0): Silken mouse enabled
[    33.227] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[    33.227] (==) modeset(0): DPMS enabled
[    33.227] (II) modeset(0): [DRI2] Setup complete
[    33.228] (II) modeset(0): [DRI2]   DRI driver: crocus
[    33.228] (II) modeset(0): [DRI2]   VDPAU driver: va_gl
[    33.228] (II) Initializing extension Generic Event Extension
[    33.228] (II) Initializing extension SHAPE
[    33.228] (II) Initializing extension MIT-SHM
[    33.228] (II) Initializing extension XInputExtension
[    33.229] (II) Initializing extension XTEST
[    33.229] (II) Initializing extension BIG-REQUESTS
[    33.229] (II) Initializing extension SYNC
[    33.229] (II) Initializing extension XKEYBOARD
[    33.230] (II) Initializing extension XC-MISC
[    33.230] (II) Initializing extension SECURITY
[    33.230] (II) Initializing extension XFIXES
[    33.230] (II) Initializing extension RENDER
[    33.230] (II) Initializing extension RANDR
[    33.231] (II) Initializing extension COMPOSITE
[    33.231] (II) Initializing extension DAMAGE
[    33.231] (II) Initializing extension MIT-SCREEN-SAVER
[    33.231] (II) Initializing extension DOUBLE-BUFFER
[    33.231] (II) Initializing extension RECORD
[    33.231] (II) Initializing extension DPMS
[    33.232] (II) Initializing extension Present
[    33.232] (II) Initializing extension DRI3
[    33.232] (II) Initializing extension X-Resource
[    33.232] (II) Initializing extension XVideo
[    33.232] (II) Initializing extension XVideo-MotionCompensation
[    33.232] (II) Initializing extension GLX
[    33.246] (II) AIGLX: Loaded and initialized crocus
[    33.246] (II) GLX: Initialized DRI2 GL provider for screen 0
[    33.246] (II) Initializing extension XFree86-VidModeExtension
[    33.246] (II) Initializing extension XFree86-DGA
[    33.246] (II) Initializing extension XFree86-DRI
[    33.246] (II) Initializing extension DRI2
[    33.258] (II) modeset(0): Damage tracking initialized
[    33.258] (II) modeset(0): Setting screen physical size to 270 x 203
[    34.022] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[    34.022] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.022] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    34.022] (**) Power Button: Applying InputClass "system-keyboard"
[    34.022] (II) LoadModule: "libinput"
[    34.022] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    34.279] (II) Module libinput: vendor="X.Org Foundation"
[    34.279] 	compiled for 1.21.1.8, module version = 1.3.0
[    34.279] 	Module class: X.Org XInput Driver
[    34.279] 	ABI class: X.Org XInput driver, version 24.4
[    34.279] (II) Using input driver 'libinput' for 'Power Button'
[    34.279] (**) Power Button: always reports core events
[    34.279] (**) Option "Device" "/dev/input/event6"
[    34.381] (II) event6  - Power Button: is tagged by udev as: Keyboard
[    34.381] (II) event6  - Power Button: device is a keyboard
[    34.381] (II) event6  - Power Button: device removed
[    34.394] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[    34.394] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    34.394] (**) Option "xkb_layout" "us"
[    34.395] (II) event6  - Power Button: is tagged by udev as: Keyboard
[    34.395] (II) event6  - Power Button: device is a keyboard
[    34.395] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[    34.395] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    34.395] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    34.395] (**) Video Bus: Applying InputClass "system-keyboard"
[    34.395] (II) Using input driver 'libinput' for 'Video Bus'
[    34.395] (**) Video Bus: always reports core events
[    34.395] (**) Option "Device" "/dev/input/event7"
[    34.396] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    34.396] (II) event7  - Video Bus: device is a keyboard
[    34.396] (II) event7  - Video Bus: device removed
[    34.410] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[    34.410] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    34.410] (**) Option "xkb_layout" "us"
[    34.410] (II) event7  - Video Bus: is tagged by udev as: Keyboard
[    34.411] (II) event7  - Video Bus: device is a keyboard
[    34.411] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    34.411] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    34.411] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    34.411] (**) Power Button: Applying InputClass "system-keyboard"
[    34.411] (II) Using input driver 'libinput' for 'Power Button'
[    34.411] (**) Power Button: always reports core events
[    34.411] (**) Option "Device" "/dev/input/event5"
[    34.412] (II) event5  - Power Button: is tagged by udev as: Keyboard
[    34.412] (II) event5  - Power Button: device is a keyboard
[    34.412] (II) event5  - Power Button: device removed
[    34.420] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event5"
[    34.420] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    34.420] (**) Option "xkb_layout" "us"
[    34.420] (II) event5  - Power Button: is tagged by udev as: Keyboard
[    34.420] (II) event5  - Power Button: device is a keyboard
[    34.421] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[    34.421] (II) No input driver specified, ignoring this device.
[    34.421] (II) This device may have been added with another device file.
[    34.421] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event8)
[    34.421] (II) No input driver specified, ignoring this device.
[    34.421] (II) This device may have been added with another device file.
[    34.422] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[    34.422] (II) No input driver specified, ignoring this device.
[    34.422] (II) This device may have been added with another device file.
[    34.423] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event0)
[    34.423] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[    34.423] (**) Genius Optical Mouse: Applying InputClass "libinput pointer catchall"
[    34.423] (II) Using input driver 'libinput' for 'Genius Optical Mouse'
[    34.423] (**) Genius Optical Mouse: always reports core events
[    34.423] (**) Option "Device" "/dev/input/event0"
[    34.476] (II) event0  - Genius Optical Mouse: is tagged by udev as: Mouse
[    34.477] (II) event0  - Genius Optical Mouse: device is a pointer
[    34.477] (II) event0  - Genius Optical Mouse: device removed
[    34.496] (II) libinput: Genius Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    34.496] (II) libinput: Genius Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    34.496] (II) libinput: Genius Optical Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[    34.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:0458:003A.0001/input/input0/event0"
[    34.496] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
[    34.496] (**) Option "AccelerationScheme" "none"
[    34.496] (**) Genius Optical Mouse: (accel) selected scheme none/0
[    34.496] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[    34.496] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[    34.549] (II) event0  - Genius Optical Mouse: is tagged by udev as: Mouse
[    34.549] (II) event0  - Genius Optical Mouse: device is a pointer
[    34.550] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[    34.550] (II) No input driver specified, ignoring this device.
[    34.550] (II) This device may have been added with another device file.
[    34.551] (II) config/udev: Adding input device Primax Dell KB216 Wired Keyboard (/dev/input/event1)
[    34.551] (**) Primax Dell KB216 Wired Keyboard: Applying InputClass "evdev keyboard catchall"
[    34.551] (**) Primax Dell KB216 Wired Keyboard: Applying InputClass "libinput keyboard catchall"
[    34.551] (**) Primax Dell KB216 Wired Keyboard: Applying InputClass "system-keyboard"
[    34.551] (II) Using input driver 'libinput' for 'Primax Dell KB216 Wired Keyboard'
[    34.551] (**) Primax Dell KB216 Wired Keyboard: always reports core events
[    34.551] (**) Option "Device" "/dev/input/event1"
[    34.552] (II) event1  - Primax Dell KB216 Wired Keyboard: is tagged by udev as: Keyboard
[    34.552] (II) event1  - Primax Dell KB216 Wired Keyboard: device is a keyboard
[    34.552] (II) event1  - Primax Dell KB216 Wired Keyboard: device removed
[    34.561] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:413C:2113.0002/input/input1/event1"
[    34.561] (II) XINPUT: Adding extended input device "Primax Dell KB216 Wired Keyboard" (type: KEYBOARD, id 10)
[    34.561] (**) Option "xkb_layout" "us"
[    34.562] (II) event1  - Primax Dell KB216 Wired Keyboard: is tagged by udev as: Keyboard
[    34.562] (II) event1  - Primax Dell KB216 Wired Keyboard: device is a keyboard
[    34.563] (II) config/udev: Adding input device Primax Dell KB216 Wired Keyboard Consumer Control (/dev/input/event2)
[    34.563] (**) Primax Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[    34.563] (**) Primax Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    34.563] (**) Primax Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    34.563] (II) Using input driver 'libinput' for 'Primax Dell KB216 Wired Keyboard Consumer Control'
[    34.563] (**) Primax Dell KB216 Wired Keyboard Consumer Control: always reports core events
[    34.563] (**) Option "Device" "/dev/input/event2"
[    34.565] (II) event2  - Primax Dell KB216 Wired Keyboard Consumer Control: is tagged by udev as: Keyboard
[    34.565] (II) event2  - Primax Dell KB216 Wired Keyboard Consumer Control: device is a keyboard
[    34.565] (II) event2  - Primax Dell KB216 Wired Keyboard Consumer Control: device removed
[    34.573] (II) libinput: Primax Dell KB216 Wired Keyboard Consumer Control: needs a virtual subdevice
[    34.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:413C:2113.0003/input/input2/event2"
[    34.573] (II) XINPUT: Adding extended input device "Primax Dell KB216 Wired Keyboard Consumer Control" (type: MOUSE, id 11)
[    34.573] (**) Option "AccelerationScheme" "none"
[    34.573] (**) Primax Dell KB216 Wired Keyboard Consumer Control: (accel) selected scheme none/0
[    34.573] (**) Primax Dell KB216 Wired Keyboard Consumer Control: (accel) acceleration factor: 2.000
[    34.573] (**) Primax Dell KB216 Wired Keyboard Consumer Control: (accel) acceleration threshold: 4
[    34.574] (II) event2  - Primax Dell KB216 Wired Keyboard Consumer Control: is tagged by udev as: Keyboard
[    34.574] (II) event2  - Primax Dell KB216 Wired Keyboard Consumer Control: device is a keyboard
[    34.575] (II) config/udev: Adding input device Primax Dell KB216 Wired Keyboard System Control (/dev/input/event3)
[    34.575] (**) Primax Dell KB216 Wired Keyboard System Control: Applying InputClass "evdev keyboard catchall"
[    34.575] (**) Primax Dell KB216 Wired Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[    34.575] (**) Primax Dell KB216 Wired Keyboard System Control: Applying InputClass "system-keyboard"
[    34.575] (II) Using input driver 'libinput' for 'Primax Dell KB216 Wired Keyboard System Control'
[    34.575] (**) Primax Dell KB216 Wired Keyboard System Control: always reports core events
[    34.575] (**) Option "Device" "/dev/input/event3"
[    34.577] (II) event3  - Primax Dell KB216 Wired Keyboard System Control: is tagged by udev as: Keyboard
[    34.577] (II) event3  - Primax Dell KB216 Wired Keyboard System Control: device is a keyboard
[    34.577] (II) event3  - Primax Dell KB216 Wired Keyboard System Control: device removed
[    34.585] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:413C:2113.0003/input/input3/event3"
[    34.585] (II) XINPUT: Adding extended input device "Primax Dell KB216 Wired Keyboard System Control" (type: KEYBOARD, id 12)
[    34.585] (**) Option "xkb_layout" "us"
[    34.586] (II) event3  - Primax Dell KB216 Wired Keyboard System Control: is tagged by udev as: Keyboard
[    34.586] (II) event3  - Primax Dell KB216 Wired Keyboard System Control: device is a keyboard
[    34.587] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[    34.587] (II) No input driver specified, ignoring this device.
[    34.587] (II) This device may have been added with another device file.
[    34.598] (**) Primax Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "evdev keyboard catchall"
[    34.598] (**) Primax Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[    34.598] (**) Primax Dell KB216 Wired Keyboard Consumer Control: Applying InputClass "system-keyboard"
[    34.598] (II) Using input driver 'libinput' for 'Primax Dell KB216 Wired Keyboard Consumer Control'
[    34.598] (**) Primax Dell KB216 Wired Keyboard Consumer Control: always reports core events
[    34.598] (**) Option "Device" "/dev/input/event2"
[    34.598] (II) libinput: Primax Dell KB216 Wired Keyboard Consumer Control: is a virtual subdevice
[    34.598] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:413C:2113.0003/input/input2/event2"
[    34.598] (II) XINPUT: Adding extended input device "Primax Dell KB216 Wired Keyboard Consumer Control" (type: KEYBOARD, id 13)
[    34.598] (**) Option "xkb_layout" "us"
[    36.119] (II) event6  - Power Button: device removed
[    36.126] (II) event7  - Video Bus: device removed
[    36.138] (II) event5  - Power Button: device removed
[    36.144] (II) event0  - Genius Optical Mouse: device removed
[    36.172] (II) event1  - Primax Dell KB216 Wired Keyboard: device removed
[    36.179] (II) event3  - Primax Dell KB216 Wired Keyboard System Control: device removed
[    36.187] (II) event2  - Primax Dell KB216 Wired Keyboard Consumer Control: device removed
[    36.195] (II) AIGLX: Suspending AIGLX clients for VT switch

              If the hardware needs the old amber drivers, they should be loaded automatically, seems this hardware can't use amber.
              Please try to add i915.modeset=0 to the kernel boot line, trying if disabling early modesetting helps any.
              To edit the kernel boot line in systemd-boot, just type e, then hit the end key and add the above.
              For Grub, also use the e key, it will be at the end right away.

                Then it is time to check hardware related issues, all cables connected as should? No damages? Do you have another install on this system, or can you check in Live mode with the July ISO?

                  demm

                  The cable is well connected. I tried another one, with the same result. I'll see if can find another one, just to check.
                  There is no other installation on the system. I will try the July ISO and let you know what happens.

                  In any case, thank you very much for your help.

                  By the way: I love KaOS.

                      iojea

                      Well... the problem is solved, though it is not clear why. I tried four different cables, the July ISO (several times, selecting different resolutions in the boot screen), and also an ISO of OpenMandriva. In all cases the result was the same: resolution defaulted to 1024x768 and only four (worse) other options were available.
                      Then, I tried an old monitor. In that case the resolution defaulted to 1440x900 (which was the correct one), and a healthy set of options was shown in systempreferences->Screen & Monitor. Concluding that the problem was the monitor, just to check I tried connecting it to the PC of a co-worker (running Arch)... and it worked just fine. So I had my monitor working correctly on another computer, and my computer running correctly with an old monitor... Puzzled, I unplugged the old monitor and, with my computer still running, I reconnected my current one, and voilà! It started at 1920x1080. Just to be sure, I rebooted, and it continued working perfectly fine.
                      It is quite odd. If you have any idea of what could have happened, I´d be glad to know about it.
                      In any case, thank you very much for your help.