First, minimal test ISO is uploaded for the April 2017 KaOS stable ISO.

As always, early test ISOs are minimal, no language packs (though Plasma 5, just the desktop, has the translations build-in), very few apps, just a web-browser, file manager, text editor, GUI package manager. The non-free nvidia drivers are included since they are a big part of what needs testing.

This time the test cycle will be a little different since it is planned to celebrate the fourth anniversary of KaOS by releasing 2 ISOs. One regular and one Wayland.
First minimal up now is X based to get the testing started. Expect a Wayland based in about 3-4 days.
Two more first for this test cycle too, virtualbox use now has full support for guest modules, this means it will automatically scale to your desired monitor resolution (or set to full screen). Second is the option to install with GPT on BIOS systems (manual partitioning only). A text box is added to calamares to instruct how to setup for GPT once a BIOS setup is detected.

KaOS ISOs are not only GTK free but are Qt4 & KDE 4 free too.
This is as pure a Qt 5/Plasma 5 ISO as possible.

Plan is to have Frameworks 5.33.0, KDE Applications 16.12.3, Plasma 5.9.4/5 and Linux 4.10.x on the final ISO. If all testing goes well expect the final ISO to be released in 10-12 days

Calamares version used is 3.1.0. Release Notes page is not fully updated yet, you will see some the text from the February ISO.

The ISO is using packages from the build, but that repo is not enabled, so if you decide to install, make sure to add the build repo to your pacman.conf.

To help with testing:

  • Use a GPT partition table on BIOS system (manual partitioning)
  • Use Isowriter to write the test ISO to your USB stick, plan is to remove imagewriter from the repos after this test cycle
  • Use in live mode on as much different hardware as possible
  • If you have an UEFI capable system, check if the ISO boots in both UEFI and legacy BIOS mode, make sure though to turn off secure boot
  • test installs on real hardware are needed, not just vbox
  • check as many partitioning options as possible in the partitioning of Calamares, see if all works and is clear enough
  • test with vbox in Live mode and installed and adjust to full screen or resize to different resolutions

debug packages for Calamares are part of all ISOs, run Calamares with gdb if you encounter errors
provide the installation log, if you encounter any issue at all

You can start Calamares from the Welcome app, or run it with:

sudo calamares -d

The install log will be created in the home directory of the Live user, see ~/installation.log. It is available after the install in the target system in /var/log/installation.log
If run from cli, make sure to pastebin the full output, since no installation.log will be copied then, though that log is more complete.

The new site for testing ISOs is still in use:
https://sourceforge.net/projects/kaos-test/files/iso/
https://sourceforge.net/projects/kaos-test/files/iso/KaOS-2017.03.31-x86_64.iso

On this ISO you will find:
Linux 4.10.8
systemd 233
gcc 5.4.1
Qt 5.8.0
Frameworks 5.32.0
Plasma 5.9.4
KDE Applications 16.12.3 kf5 based
Git builds of KDE Application that are ported to frameworks, but were not part yet of 16.12
Calamares 3.1.0.2
Octopi 0.9dev with sysinfo & cachecleaner tool

Known issues:

  • none at this time

can not install it

Error Boost.Python en el proceso "package_removal".
<class 'subprocess.CalledProcessError'>
Command 'systemd-detect-virt' returned non-zero exit status 1.
Traceback:
File "/usr/lib/calamares/modules/package_removal/main.py", line 76, in run
vbox = subprocess.check_output('systemd-detect-virt')

File "/usr/lib/python3.6/subprocess.py", line 336, in check_output
**kwargs).stdout

File "/usr/lib/python3.6/subprocess.py", line 418, in run
output=stdout, stderr=stderr)

  • demm replied to this.

    ki00
    If you want to help with testing read the first post and give full info.

      Hello, I am running kaos 2017-01 in a windows made partition (the reverse seems harder), and just wanted to overwrite the windows partition with the kaos beta but couldn't do it. Sorry for not give this info. Thanks.

      In other words, I am actually running kaos 2017-01 and windows (2 partitions, windows made) but I wanted to run kaos 2017-01 and kaos beta (without erasing 2017-01 because the other is beta), that is. Thanks.

      Issue found and fixed:
      https://github.com/KaOSx/calamares/commit/d25ef2af1a19e1aeab65210b30bf6775ec571dee
      You can test this fix with the same ISO (there are no beta or RC ISOs for KaOS, just a bunch of date-named test ISOs until stable is released). In Live mode install new calamares packages:

      sudo pacman -U http://kaosx.tk/repo/build/calamares-3.1.0.3-1-x86_64.pkg.tar.xz http://kaosx.tk/repo/build/calamares-debug-3.1.0.3-1-x86_64.pkg.tar.xz

      Hi, I try the same ISO and run the command in live mode before the installation, and bounce this:

      [live@localhost ~]$ sudo pacman -U
      http://kaosx.tk/repo/build/calamares-3.1.0.3-1-x86_64.pkg.tar.xz
      http://kaosx.tk/repo/build/calamares-debug-3.1.0.3-1-x86_64.pkg.tar.xz
      error: failed retrieving file 'calamares-3.1.0.3-1-x86_64.pkg.tar.xz'
      from kaosx.tk : Resolving timed out after 10520 milliseconds warning:
      failed to download
      http://kaosx.tk/repo/build/calamares-3.1.0.3-1-x86_64.pkg.tar.xz
      error:
      'http://kaosx.tk/repo/build/calamares-3.1.0.3-1-x86_64.pkg.tar.xz':
      download library error error: failed retrieving file
      'calamares-debug-3.1.0.3-1-x86_64.pkg.tar.xz' from kaosx.tk :
      Resolving timed out after 10520 milliseconds warning: failed to
      download
      http://kaosx.tk/repo/build/calamares-debug-3.1.0.3-1-x86_64.pkg.tar.xz
      error:
      'http://kaosx.tk/repo/build/calamares-debug-3.1.0.3-1-x86_64.pkg.tar.xz':
      download library error [live@localhost ~]$

      You have to be connected to the internet to download & install.

      Second minimal ISO is up, changes since the first:

      • move to Frameworks 5.33.0
      • latest checkout of Plasma 5.9 (pkgver set at 5.9.4.1)
      • mesa 17.0.3
      • calamares bug fix for removal of virtualbox packages on non VM systems
      • calamares updated release notes, reflect now what will be used in final ISO
      • updated libva packages

      Md5sum: 0eb10d157e5b1e0296db990d6ba592d9 KaOS-2017.04.03-x86_64.iso
      https://sourceforge.net/projects/kaos-test/files/iso
      https://sourceforge.net/projects/kaos-test/files/iso/KaOS-2017.04.03-x86_64.iso

      Hi, I tried to install 20170403 through erase disk option and manual partition option and appears both:

      Boost.Python error in job "package_removal".
<class 'IndentationError'>
('expected an indented block', ('/usr/lib/calamares/modules/package_removal/main.py', 82, 13, " print('Removing guest-utils')\n"))

      with the first iSO also appeared this (just one time)

      Application: Calamares (calamares), signal: Unknown
Using host libthread_db library "/lib/libthread_db.so.1".
[Current thread is 1 (Thread 0x7fd743789d00 (LWP 1755))]

Thread 10 (Thread 0x7fd6d9e38700 (LWP 1865)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd74a56fbee in  () at /lib/libresolv.so.2
#2  0x00007fd74a56de4a in __libc_res_nquery () at /lib/libresolv.so.2
#3  0x00007fd74a56e42e in  () at /lib/libresolv.so.2
#4  0x00007fd74a56e888 in __libc_res_nsearch () at /lib/libresolv.so.2
#5  0x00007fd6d94349b9 in _nss_dns_gethostbyname4_r () at /lib/libnss_dns.so.2
#6  0x00007fd756e4ba1f in gaih_inet.constprop () at /lib/libc.so.6
#7  0x00007fd756e4cc35 in getaddrinfo () at /lib/libc.so.6
#8  0x00007fd750649b82 in  () at /usr/lib/libQt5Network.so.5
#9  0x00007fd75063d7eb in  () at /usr/lib/libQt5Network.so.5
#10 0x00007fd757973be3 in  () at /usr/lib/libQt5Core.so.5
#11 0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#12 0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#13 0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 9 (Thread 0x7fd6da639700 (LWP 1864)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd750b62a04 in  () at /usr/lib/libglib-2.0.so.0
#2  0x00007fd750b62b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
#3  0x00007fd757b8fe9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#4  0x00007fd757b3dbba in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#5  0x00007fd757972d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
#6  0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#7  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#8  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 8 (Thread 0x7fd6db0e6700 (LWP 1791)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd750b62a04 in  () at /usr/lib/libglib-2.0.so.0
#2  0x00007fd750b62b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
#3  0x00007fd757b8fe9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#4  0x00007fd757b3dbba in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#5  0x00007fd757972d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
#6  0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#7  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#8  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 7 (Thread 0x7fd6e94cb700 (LWP 1773)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd750b62a04 in  () at /usr/lib/libglib-2.0.so.0
#2  0x00007fd750b62b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
#3  0x00007fd757b8fe9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#4  0x00007fd757b3dbba in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#5  0x00007fd757972d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
#6  0x00007fd754b333a5 in  () at /usr/lib/libQt5Qml.so.5
#7  0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#8  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#9  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 6 (Thread 0x7fd6ea331700 (LWP 1769)):
[KCrash Handler]
#6  0x00007fd72d7eec46 in  () at /usr/lib/libparted.so.2
#7  0x00007fd72d8004d9 in ptt_read_sectors () at /usr/lib/libparted.so.2
#8  0x00007fd72d7f5861 in  () at /usr/lib/libparted.so.2
#9  0x00007fd72d7ea3ad in ped_disk_probe () at /usr/lib/libparted.so.2
#10 0x00007fd72d7ebaaa in ped_disk_new () at /usr/lib/libparted.so.2
#11 0x00007fd6ea54fa0c in LibPartedBackend::scanDevice(QString const&) (this=0x494e8c0, deviceNode=...) at /buildsys/apps/kpmcore/src/kpmcore-3.0.3/src/plugins/libparted/libpartedbackend.cpp:398
#12 0x00007fd6ea55041d in LibPartedBackend::scanDevices(bool) (this=0x494e8c0, excludeReadOnly=true) at /buildsys/apps/kpmcore/src/kpmcore-3.0.3/src/plugins/libparted/libpartedbackend.cpp:443
#13 0x00007fd6eac8daf6 in PartitionCoreModule::doInit() (this=this@entry=0x271a610) at /buildsys/apps/calamares/src/calamares/src/modules/partition/core/PartitionCoreModule.cpp:156
#14 0x00007fd6eac8f053 in PartitionCoreModule::init() (this=0x271a610) at /buildsys/apps/calamares/src/calamares/src/modules/partition/core/PartitionCoreModule.cpp:146
#15 0x00007fd6eac8f7c5 in QtConcurrent::RunFunctionTask<void>::run() (this=0x4977630) at /usr/include/qt5/QtConcurrent/qtconcurrentrunbase.h:136
#16 0x00007fd757973be3 in  () at /usr/lib/libQt5Core.so.5
#17 0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#18 0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#19 0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 5 (Thread 0x7fd6eb945700 (LWP 1760)):
#0  0x00007fd7576b9ac5 in pthread_cond_timedwait@@GLIBC_2.3.2 () at /lib/libpthread.so.0
#1  0x00007fd7579783d6 in QWaitCondition::wait(QMutex*, unsigned long) () at /usr/lib/libQt5Core.so.5
#2  0x00007fd757973ddc in  () at /usr/lib/libQt5Core.so.5
#3  0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#4  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#5  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 4 (Thread 0x7fd735fba700 (LWP 1758)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd750b62a04 in  () at /usr/lib/libglib-2.0.so.0
#2  0x00007fd750b62b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
#3  0x00007fd757b8fe9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#4  0x00007fd757b3dbba in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#5  0x00007fd757972d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
#6  0x00007fd7427f2975 in  () at /usr/lib/qt5/plugins/platforms/../../../libQt5DBus.so.5
#7  0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#8  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#9  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 3 (Thread 0x7fd740af2700 (LWP 1757)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd74b48b892 in  () at /usr/lib/libxcb.so.1
#2  0x00007fd74b48d5e7 in xcb_wait_for_event () at /usr/lib/libxcb.so.1
#3  0x00007fd742e81da9 in  () at /usr/lib/qt5/plugins/platforms/../../../libQt5XcbQpa.so.5
#4  0x00007fd7579776e9 in  () at /usr/lib/libQt5Core.so.5
#5  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#6  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 2 (Thread 0x7fd743743700 (LWP 1756)):
#0  0x00007fd7576b95cf in pthread_cond_wait@@GLIBC_2.3.2 () at /lib/libpthread.so.0
#1  0x00007fd7573e06bc in __gthread_cond_wait (__mutex=<optimized out>, __cond=<optimized out>) at /buildsys/core/gcc/src/gcc-build/x86_64-unknown-linux-gnu/libstdc++-v3/include/x86_64-unknown-linux-gnu/bits/gthr-default.h:864
#2  0x00007fd7573e06bc in std::condition_variable::wait(std::unique_lock<std::mutex>&) (this=<optimized out>, __lock=...) at /buildsys/core/gcc/src/gcc-5-20170214/libstdc++-v3/src/c++11/condition_variable.cc:53
#3  0x00007fd74f77a30e in  () at /usr/lib/libQt5WebKit.so.5
#4  0x00007fd74f77a429 in  () at /usr/lib/libQt5WebKit.so.5
#5  0x00007fd7573e5850 in std::execute_native_thread_routine(void*) (__p=<optimized out>) at /buildsys/core/gcc/src/gcc-5-20170214/libstdc++-v3/src/c++11/thread.cc:84
#6  0x00007fd7576b3494 in start_thread () at /lib/libpthread.so.0
#7  0x00007fd756e606ff in clone () at /lib/libc.so.6

Thread 1 (Thread 0x7fd743789d00 (LWP 1755)):
#0  0x00007fd756e56ffd in poll () at /lib/libc.so.6
#1  0x00007fd750b62a04 in  () at /usr/lib/libglib-2.0.so.0
#2  0x00007fd750b62b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
#3  0x00007fd757b8fe9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#4  0x00007fd757b3dbba in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () at /usr/lib/libQt5Core.so.5
#5  0x00007fd757b45be4 in QCoreApplication::exec() () at /usr/lib/libQt5Core.so.5
#6  0x00000000004130ce in main(int, char**) (argc=2, argv=<optimized out>) at /buildsys/apps/calamares/src/calamares/src/calamares/main.cpp:71

      Make sure to check md5sum, seems you have a wrong ISO. See my previous post for correct md5.
      And again, read the first post, provide complete logs to help with testing.
      To post readable logs, use code tags, done for you this time.

      Hi, here is the log for the installation of kaos 2017.01 through erase disk option.
      Thanks for all. I will download again the beta kaos then.

      Do not post here for stable ISOs, this is for the April ISO test cycle, log removed (and for future reference use code tags, not quote). There is no beta ISO, might be best for you to stop downloading ISOs and wait for the stable release.

      Hi, Thanks for all your time. isowrite is going to be replaced?
      just downloaded the last iso again and could be installed in erase disk option:

      23:05:10 [1]: Calamares version: 3.1.0.20170403-git-master-7d10f9c

      23:05:10 [1]: Default font =====
      Pixel size: -1
      Point size: 10
      Point sizeF: 10
      Font family: "Noto Sans"
      Metric height: 18
      23:05:10 [1]: Font height: 18
      23:05:10 [1]: Available languages: ("ast", "ca", "cs", "de", "en", "es", "es_AR", "fr", "hr", "hu", "id_ID", "it", "nl_NL", "pl", "pt_BR", "pt_PT", "ro_RO", "ru", "sl", "sr_RS", "sv", "tr_TR")
      m_crashReporterWChar: /usr/bin/../libexec/calamares_crash_reporter23:05:10 [8]: Shutting down Calamares...
      23:05:10 [8]: Finished shutdown.

      HERE ARE SOME INVALID CHARACTERS: The file /run/media/...................installation.log was opened with UTF-8 encoding but contained invalid characters.
      It is set to read-only mode, as saving might destroy its content.
      Either reopen the file with the correct encoding chosen or enable the read-write mode again in the tools menu to be able to edit it.<<<<<<<<<<<<<<<<<<<<<<

      23:05:10 [1]: WARNING: cannot acquire a list of available locales. The locale and localecfg modules will be broken as long as this system does not provide a /usr/share/i18n/SUPPORTED file OR a well-formed /etc/locale.gen OR a complete pre-compiled locale-gen database which allows complete locale -a output.
      23:05:10 [1]: ViewModule "locale@locale" loading complete.
      23:05:11 [1]: ViewModule "keyboard@keyboard" loading complete.
      23:05:11 [8]: Loaded backend plugin: "pmlibpartedbackendplugin"
      23:05:11 [1]: ViewModule "partition@partition" loading complete.
      23:05:11 [1]: ViewModule "users@users" loading complete.
      23:05:11 [1]: ViewModule "summary@summary" loading complete.
      23:05:11 [1]: Module "partition@partition" already loaded.
      23:05:11 [1]: QML import paths: ("/usr/share/calamares/qml", "/usr/bin", "qrc:/qt-project.org/imports", "/usr/lib/qt5/qml")
      23:05:11 [1]: Module "locale@locale" already loaded.
      23:05:11 [1]: Module "keyboard@keyboard" already loaded.
      23:05:11 [1]: Module "users@users" already loaded.
      23:05:11 [1]: ViewModule "finished@finished" loading complete.
      23:05:11 [1]: STARTUP: loadModules for all modules done
      23:05:11 [1]: STARTUP: Window now visible and ProgressTreeView populated
      23:05:11 [1]: Need at least storage bytes: 7516192768
      23:05:11 [1]: Need at least ram bytes: 1073741824
      23:05:11 [1]: A battery exists, checking for mains power.
      No layout variant specified on the command line
      Trailing -variant option ignored
      23:05:11 [1]: xkbmap selection changed to: "us" - ""
      23:05:12 [1]: enoughStorage, enoughRam, hasPower, hasInternet, isRoot: true true true false true
      00:05:12 [1]: WARNING: cannot acquire a list of available locales. The locale and localecfg modules will be broken as long as this system does not provide       a /usr/share/i18n/SUPPORTED file OR a well-formed /etc/locale.gen OR a complete pre-compiled locale-gen database which allows complete locale -a output.
      19:05:12 [1]: WARNING: cannot acquire a list of available locales. The locale and localecfg modules will be broken as long as this system does not provide a /usr/share/i18n/SUPPORTED file OR a well-formed /etc/locale.gen OR a complete pre-compiled locale-gen database which allows complete locale -a output.
      19:05:12 [1]: WARNING: cannot acquire a list of available locales. The locale and localecfg modules will be broken as long as this system does not provide       a /usr/share/i18n/SUPPORTED file OR a well-formed /etc/locale.gen OR a complete pre-compiled locale-gen database which allows complete locale -a output.
      19:05:12 [1]: WARNING: cannot acquire a list of available locales. The locale and localecfg modules will be broken as long as this system does not provide a /usr/share/i18n/SUPPORTED file OR a well-formed /etc/locale.gen OR a complete pre-compiled locale-gen database which allows complete locale -a output.
      19:05:13 [8]: getting smart status failed for "/dev/sdb" : Operation not supported
      19:05:14 [1]: LIST OF DETECTED DEVICES:
      node capacity name prettyName
      19:05:14 [1]: "/dev/sda" 750153761280 "ATA TOSHIBA MQ01ABD0" "ATA TOSHIBA MQ01ABD0 – 698.64 GiB (/dev/sda)"
      19:05:17 [1]: checking if "/dev/sda1" can be resized.
      19:05:17 [1]: "/dev/sda1" seems like a good path
      19:05:17 [1]: found Partition       for "/dev/sda1"
      19:05:17 [1]: "Osprober lines, clean:\n/dev/sda1:KaOS (rolling):KaOS:linux"
      19:05:17 [1]: Updating partitioning state widgets.
      19:05:17 [0]: QCoreApplication::postEvent: Unexpected null receiver
      19:05:17 [0]: QObject::setParent: Cannot set parent, new parent is in a different thread
      19:05:17 [1]: Required storage B: 10200547328 "(9G😎"
      19:05:17 [1]: Available storage B: 9448928256 "(8G😎" for "/dev/sda2" length: 18454938 sectorsUsed: 0 fsType: "linuxswap"
      19:05:17 [1]: Required storage B: 8053063680 "(7G😎"
      19:05:17 [1]: Storage capacity B: 740703783936 "(689G😎" for "/dev/sda1" length: 1446687078
      19:05:17 [1]: Partition "/dev/sda1" authorized for replace install.
      19:05:17 [1]: Updating partitioning preview widgets.
      19:05:17 [0]: QCoreApplication::postEvent: Unexpected null receiver
      18:05:31 [1]: CreatePartitionTableJob::createTable trying to make table for device "/dev/sda"
      18:05:31 [1]: Suggested swap size: 8.8 GiB
      18:05:31 [1]: # Queue:
      18:05:31 [1]: ## Device: "ATA TOSHIBA MQ01ABD0"
      18:05:31 [1]: - "Create new msdos partition table on /dev/sda."
      18:05:31 [1]: - "Create new 706390MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system xfs."
      18:05:31 [1]: - "Create new 9011MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system linuxswap."
      18:05:31 [1]: Updating partitioning preview widgets.
      18:05:31 [0]: QCoreApplication::postEvent: Unexpected null receiver
      18:05:34 [1]: PCM::setBootLoaderInstallPath "/dev/sda"
      18:05:49 [0]: QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
      18:05:49 [0]: QObject::setParent: Cannot set parent, new parent is in a different thread
      18:05:49 [1]: Creating FillGlobalStorageJob with bootLoader path "/dev/sda"
      18:05:49 [1]: PartitionCodeModule has been asked for jobs. About to return: "Clear all temporary mounts.\nClear mounts for partitioning operations on /dev/sda\nCreate new msdos partition table on /dev/sda.\nCreate new 706390MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system xfs.\nCreate new 9011MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system linuxswap.\nSet partition information"
      18:05:49 [1]: Gathering UUIDs for partitions that exist now.
      18:05:49 [1]: QHash(("", ""))
      18:05:49 [1]: Writing to GlobalStorage["partitions"]
      18:05:49 [1]: "" mtpoint: "/" fs: QVariant(QString, "xfs") ""
      18:05:49 [1]: "" mtpoint: "" fs: QVariant(QString, "linuxswap") ""
      18:05:49 [8]: QVariant(QString, "") "" "/" "xfs"
      18:05:49 [8]: QVariant(QString, "") "" "" "linuxswap"
      18:05:49 [1]: Gathering UUIDs for partitions that exist now.
      18:05:49 [1]: QHash(("", ""))
      18:05:49 [1]: Writing to GlobalStorage["partitions"]
      18:05:49 [1]: "" mtpoint: "/" fs: QVariant(QString, "xfs") ""
      18:05:49 [1]: "" mtpoint: "" fs: QVariant(QString, "linuxswap") ""
      18:05:49 [8]: QVariant(QString, "") "" "/" "xfs"
      18:05:49 [8]: QVariant(QString, "") "" "" "linuxswap"
      18:05:54 [1]: loading ok

      18:05:55 [1]: Creating FillGlobalStorageJob with bootLoader path "/dev/sda"
      18:05:55 [1]: PartitionCodeModule has been asked for jobs. About to return: "Clear all temporary mounts.\nClear mounts for partitioning operations on /dev/sda\nCreate new msdos partition table on /dev/sda.\nCreate new 706390MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system xfs.\nCreate new 9011MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system linuxswap.\nSet partition information"
      18:05:55 [0]: Starting job "Clear all temporary mounts."
      18:05:55 [1]: Opened mtab. Lines:
      18:05:55 [1]: "proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0"
      18:05:55 [1]: "sys /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0"
      18:05:55 [1]: "dev /dev devtmpfs rw,nosuid,relatime,size=2991268k,nr_inodes=747817,mode=755 0 0"
      18:05:55 [1]: "run /run tmpfs rw,nosuid,nodev,relatime,mode=755 0 0"
      18:05:55 [1]: "union / aufs rw,relatime,si=39a2455267f41868 0 0"
      18:05:55 [1]: "/dev/sdb1 /bootmnt iso9660 ro,relatime 0 0"
      18:05:55 [1]: "securityfs /sys/kernel/security securityfs rw,nosuid,nodev,noexec,relatime 0 0"
      18:05:55 [1]: "tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0"
      18:05:55 [1]: "devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0"
      18:05:55 [1]: "tmpfs /sys/fs/cgroup tmpfs ro,nosuid,nodev,noexec,mode=755 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/unified cgroup2 rw,nosuid,nodev,noexec,relatime 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/systemd cgroup rw,nosuid,nodev,noexec,relatime,xattr,name=systemd 0 0"
      18:05:55 [1]: "pstore /sys/fs/pstore pstore rw,nosuid,nodev,noexec,relatime 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/devices cgroup rw,nosuid,nodev,noexec,relatime,devices 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/memory cgroup rw,nosuid,nodev,noexec,relatime,memory 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/freezer cgroup rw,nosuid,nodev,noexec,relatime,freezer 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/blkio cgroup rw,nosuid,nodev,noexec,relatime,blkio 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/net_cls cgroup rw,nosuid,nodev,noexec,relatime,net_cls 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/pids cgroup rw,nosuid,nodev,noexec,relatime,pids 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/cpuset cgroup rw,nosuid,nodev,noexec,relatime,cpuset 0 0"
      18:05:55 [1]: "cgroup /sys/fs/cgroup/cpu,cpuacct cgroup rw,nosuid,nodev,noexec,relatime,cpu,cpuacct 0 0"
      18:05:55 [1]: "debugfs /sys/kernel/debug debugfs rw,relatime 0 0"
      18:05:55 [1]: "systemd-1 /proc/sys/fs/binfmt_misc autofs rw,relatime,fd=36,pgrp=1,timeout=0,minproto=5,maxproto=5,direct 0 0"
      18:05:55 [1]: "hugetlbfs /dev/hugepages hugetlbfs rw,relatime 0 0"
      18:05:55 [1]: "mqueue /dev/mqueue mqueue rw,relatime 0 0"
      18:05:55 [1]: "configfs /sys/kernel/config configfs rw,relatime 0 0"
      18:05:55 [1]: "tmpfs /tmp tmpfs rw,nosuid,nodev,relatime 0 0"
      18:05:55 [1]: "tmpfs /run/user/1000 tmpfs rw,nosuid,nodev,relatime,size=600648k,mode=700,uid=1000,gid=100 0 0"
      18:05:55 [1]: "fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0"
      18:05:55 [1]: ClearTempMountsJob finished. Here's what was done:
      ""
      18:05:55 [0]: Starting job "Clear mounts for partitioning operations on /dev/sda"
      18:05:56 [1]: ClearMountsJob finished. Here's what was done:
      "Successfully cleared swap /dev/sda2."
      18:05:56 [0]: Starting job "Create new msdos partition table on /dev/sda."
      18:05:56 [1]: CreatePartitionTableJob::createTable trying to make table for device "/dev/sda"
      18:05:56 [1]: Creating new partition table of type "msdos" , uncommitted yet:
      true
      18:05:56 [1]: lsblk:
      "NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT\nloop0 7:0 0 10.7M 1 loop \nloop1 7:1 0 44.8M 1 loop \nloop2 7:2 0 1.2G 1 loop \nsda 8:0 0 698.7G 0 disk \n\xE2\x94\x9C\xE2\x94\x80sda1 8:1 0 689.9G 0 part \n\xE2\x94\x94\xE2\x94\x80sda2 8:2 0 8.8G 0 part \nsdb 8:16 1 14.5G 0 disk \n\xE2\x94\x9C\xE2\x94\x80sdb1 8:17 1 1.3G 0 part /bootmnt\n\xE2\x94\x94\xE2\x94\x80sdb2 8:18 1 31M 0 part \nsr0 11:0 1 1024M 0 rom \n"
      18:05:56 [1]: mount:
      "proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)\nsys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)\ndev on /dev type devtmpfs (rw,nosuid,relatime,size=2991268k,nr_inodes=747817,mode=755)\nrun on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)\nunion on / type aufs (rw,relatime,si=39a2455267f41868)\n/dev/sdb1 on /bootmnt type iso9660 (ro,relatime)\nsecurityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)\ntmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)\ndevpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)\ntmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)\ncgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)\ncgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)\npstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)\ncgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)\ncgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)\ncgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)\ncgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)\ncgroup on /sys/fs/cgroup/net_cls type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls)\ncgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)\ncgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)\ncgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)\ndebugfs on /sys/kernel/debug type debugfs (rw,relatime)\nsystemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=36,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)\nhugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)\nmqueue on /dev/mqueue type mqueue (rw,relatime)\nconfigfs on /sys/kernel/config type configfs (rw,relatime)\ntmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)\ntmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=600648k,mode=700,uid=1000,gid=100)\nfusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)\n"
      18:05:56 [0]: Starting job "Create new 706390MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system xfs."
      18:06:02 [0]: Starting job "Create new 9011MB partition on /dev/sda (ATA TOSHIBA MQ01ABD0) with file system linuxswap."
      18:06:04 [0]: Starting job "Set partition information"
      18:06:04 [1]: Gathering UUIDs for partitions that exist now.
      18:06:04 [1]: QHash(("/dev/sda1", "d45f43e8-7756-4b2e-8a1b-2d4f1e3f5872")("/dev/sda2", "289ac6f9-0824-4765-b5f5-eabce4eed72b"))
      18:06:04 [1]: Writing to GlobalStorage["partitions"]
      18:06:04 [1]: "/dev/sda1" mtpoint: "/" fs: QVariant(QString, "xfs") "d45f43e8-7756-4b2e-8a1b-2d4f1e3f5872"
      18:06:04 [1]: "/dev/sda2" mtpoint: "" fs: QVariant(QString, "linuxswap") "289ac6f9-0824-4765-b5f5-eabce4eed72b"
      18:06:04 [1]: FillGlobalStorageJob writing bootLoader path: QVariant(QVariantMap, QMap(("installPath", QVariant(QString, "/dev/sda"))))
      18:06:04 [0]: Starting job "mount"
      18:06:05 [0]: Starting job "unpackfs"
      18:14:25 [0]: Starting job "machineid"
      18:14:25 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "systemd-machine-id-setup")
      18:14:26 [0]: Finished. Exit code: 0
      18:14:26 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "ln", "-s", "/etc/machine-id", "/var/lib/dbus/machine-id")
      18:14:26 [0]: Finished. Exit code: 0
      18:14:26 [0]: Starting job "fstab"
      18:14:26 [0]: Starting job "Set timezone to America/Bogota"
      18:14:26 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "rm", "-f", "/etc/localtime")
      18:14:26 [0]: Finished. Exit code: 0
      18:14:26 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "ln", "-s", "/usr/share/zoneinfo/America/Bogota", "/etc/localtime")
      18:14:26 [0]: Finished. Exit code: 0
      18:14:26 [0]: Starting job "Set keyboard model to pc105, layout to us-"
      18:14:26 [1]: Executing SetKeyboardLayoutJob
      18:14:26 [1]: Found legacy keymap "us" with score 11
      18:14:26 [1]: Found legacy keymap "us-acentos" with score 11
      18:14:26 [1]: Found legacy keymap "dvorak" with score 11
      18:14:26 [1]: Found legacy keymap "dvorak" with score 11
      18:14:26 [1]: Written KEYMAP= "us" to vconsole.conf
      18:14:26 [1]: Written XkbLayout "us" ; XkbModel "pc105" ; XkbVariant "" to X.org file "/tmp/calamares-root-7uuabqxg/etc/X11/xorg.conf.d/00-keyboard.conf"
      18:14:26 [0]: Starting job "localecfg"
      18:14:26 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "locale-gen")
      18:14:30 [0]: Finished. Exit code: 0
      18:14:30 [0]: Starting job "luksbootkeyfile"
      18:14:30 [0]: Starting job "luksopenswaphookcfg"
      18:14:30 [0]: Starting job "initcpiocfg"
      18:14:30 [0]: Starting job "hardwr"
      18:14:30 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "mkinitcpio", "-p", "linux")
      18:14:48 [0]: Finished. Exit code: 0
      18:14:50 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/tmp/calamares-root-7uuabqxg/etc/modprobe.d")
      18:14:50 [0]: Finished. Exit code: 0
      18:14:50 [0]: Starting job "Create user user"
      18:14:50 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "groupadd", "lpadmin")
      18:14:52 [0]: Finished. Exit code: 0
      18:14:52 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "groupadd", "autologin")
      18:14:52 [0]: Finished. Exit code: 0
      18:14:52 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "useradd", "-m", "-s", "/bin/bash", "-U", "-c", "user", "user")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "usermod", "-aG", "users,lp,video,network,storage,wheel,audio,lpadmin,autologin", "user")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "chown", "-R", "user:user", "/home/user")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Starting job "Set password for user user"
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "usermod", "-p", "$6$user$UneVNmCFBuopgzy9iO6qX2zHYKvWLzefmdQnMLr4nsxDzC375FbVoMTJOh/BZxGKN7EJi4b9hHSr4WOQdy1Y2/", "user")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Starting job "Set password for user root"
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "usermod", "-p", "$6$root$YjbBMhG9S.MHETsX7iXWf/OQJbprOf.eK25U1Aaru9Q0H2fKpUZHCe9VcSWyH1y5fr0uOk1fcQPr2sUWxRdSb.", "root")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Starting job "Set hostname user-pc"
      18:14:53 [0]: Starting job "networkcfg"
      18:14:53 [0]: Starting job "services"
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "systemctl", "enable", "NetworkManager.service")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "systemctl", "enable", "org.cups.cupsd.service")
      18:14:53 [0]: Finished. Exit code: 1
      18:14:53 [1]: [PYTHON JOB]: "Cannot enable systemd service org.cups.cupsd"
      18:14:53 [1]: [PYTHON JOB]: "systemctl enable call in chroot returned error code 1"
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "systemctl", "enable", "graphical.target")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "systemctl", "disable", "pacman-init.service")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Starting job "grubconf"
      18:14:53 [0]: Starting job "kdm_sddm"
      18:14:53 [1]: [PYTHON JOB]: "Setting up autologin for user user."
      18:14:53 [0]: Starting job "userkf5"
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/Desktop")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.config")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.local/share/applications/")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.local/share/konqueror")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.local/share/konsole")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.config/autostart")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.config/plasma-workspace/env")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "/usr/bin/mkdir", "-p", "/home/user/.config/qtcurve")
      18:14:53 [0]: Finished. Exit code: 0
      18:14:53 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "chown", "-R", "user:users", "/home/user")
      18:14:54 [0]: Finished. Exit code: 0
      18:14:54 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "setcap", "cap_net_raw=ep", "/usr/bin/ping")
      18:14:54 [0]: Finished. Exit code: 0
      18:14:54 [0]: Starting job "driver_cleanup"
      18:14:54 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "xf86-video-nouveau")
      18:14:55 [0]: Finished. Exit code: 0
      18:14:55 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "xf86-video-amdgpu")
      18:14:55 [0]: Finished. Exit code: 0
      18:14:55 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "xf86-video-ati")
      18:14:55 [0]: Finished. Exit code: 0
      18:14:55 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "xf86-video-vmware")
      18:14:55 [0]: Finished. Exit code: 0
      18:14:55 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-Rncs", "--noconfirm", "xf86-input-wacom")
      18:14:55 [0]: Finished. Exit code: 0
      18:14:55 [0]: Starting job "nonfree_drivers"
      18:14:55 [0]: Starting job "package_removal"
      18:14:55 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-Rns", "--noconfirm", "calamares", "calamares-debug", "console-setup")
      18:15:05 [0]: Finished. Exit code: 0
      18:15:06 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "welcome")
      18:15:06 [0]: Finished. Exit code: 0
      18:15:06 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-Rns", "--noconfirm", "hardware-detection")
      18:15:06 [0]: Finished. Exit code: 0
      18:15:06 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "init-live")
      18:15:06 [0]: Finished. Exit code: 0
      18:15:06 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-Rns", "--noconfirm", "efibootmgr")
      18:15:07 [0]: Finished. Exit code: 0
      18:15:07 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "pacman", "-R", "--noconfirm", "virtualbox-guest-utils", "virtualbox-guest-modules")
      18:15:25 [0]: Finished. Exit code: 0
      18:15:25 [0]: Starting job "bootldr"
      18:15:25 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "grub-install", "/dev/sda")
      18:15:54 [0]: Finished. Exit code: 0
      18:15:54 [0]: Running "chroot" ("/tmp/calamares-root-7uuabqxg", "grub-mkconfig", "-o", "/boot/grub/grub.cfg")
      18:16:03 [0]: Finished. Exit code: 0
      18:16:03 [0]: Starting job "gummi_entries"
      18:16:03 [0]: Starting job "umount"

      This appears when turn offline the pc after trying to install in manual mode:

      Application: Calamares (calamares), signal: Unknown

      Using host libthread_db library "/lib/libthread_db.so.1".
      [Current thread is 1 (Thread 0x7fd31a23dd00 (LWP 4576))]

      Thread 9 (Thread 0x7fd2b8a09700 (LWP 4674)):
      #0 0x00007fd32e16dac5 in pthread_cond_timedwait@@GLIBC_2.3.2 () at /lib/libpthread.so.0
      #1 0x00007fd32e42c3d6 in QWaitCondition::wait(QMutex*, unsigned long) () at /usr/lib/libQt5Core.so.5
      #2 0x00007fd32e427ddc in () at /usr/lib/libQt5Core.so.5
      #3 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #4 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #5 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 8 (Thread 0x7fd2b9cb7700 (LWP 4595)):
      #0 0x00007fd32d90affd in poll () at /lib/libc.so.6
      #1 0x00007fd327616a04 in () at /usr/lib/libglib-2.0.so.0
      #2 0x00007fd327616b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
      #3 0x00007fd32e643e9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #4 0x00007fd32e5f1bba in QEventLoop::exec(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #5 0x00007fd32e426d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
      #6 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #7 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #8 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 7 (Thread 0x7fd2bbfff700 (LWP 4589)):
      #0 0x00007fd32d90affd in poll () at /lib/libc.so.6
      #1 0x00007fd327616a04 in () at /usr/lib/libglib-2.0.so.0
      #2 0x00007fd327616b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
      #3 0x00007fd32e643e9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #4 0x00007fd32e5f1bba in QEventLoop::exec(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #5 0x00007fd32e426d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
      #6 0x00007fd32b5e73a5 in () at /usr/lib/libQt5Qml.so.5
      #7 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #8 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #9 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 6 (Thread 0x7fd2c0f31700 (LWP 4587)):
      [KCrash Handler]
      #6 0x00007fd31b1d448b in blkid_free_probe () at /usr/lib/libblkid.so.1
      #7 0x00007fd30428274f in () at /usr/lib/libparted.so.2
      #8 0x00007fd2c114fc33 in LibPartedBackend::scanDevice(QString const&) (this=0x36aa2f0, deviceNode=...) at /buildsys/apps/kpmcore/src/kpmcore-3.0.3/src/plugins/libparted/libpartedbackend.cpp:408
      #9 0x00007fd2c115041d in LibPartedBackend::scanDevices(bool) (this=0x36aa2f0, excludeReadOnly=true) at /buildsys/apps/kpmcore/src/kpmcore-3.0.3/src/plugins/libparted/libpartedbackend.cpp:443
      #10 0x00007fd2c188da76 in PartitionCoreModule::doInit() (this=this@entry=0x1475180) at /buildsys/apps/calamares/src/calamares/src/modules/partition/core/PartitionCoreModule.cpp:156
      #11 0x00007fd2c188efd3 in PartitionCoreModule::init() (this=0x1475180) at /buildsys/apps/calamares/src/calamares/src/modules/partition/core/PartitionCoreModule.cpp:146
      #12 0x00007fd2c188f745 in QtConcurrent::RunFunctionTask<void>::run() (this=0x36d1740) at /usr/include/qt5/QtConcurrent/qtconcurrentrunbase.h:136
      #13 0x00007fd32e427be3 in () at /usr/lib/libQt5Core.so.5
      #14 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #15 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #16 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 5 (Thread 0x7fd2c2545700 (LWP 4581)):
      #0 0x00007fd32e16dac5 in pthread_cond_timedwait@@GLIBC_2.3.2 () at /lib/libpthread.so.0
      #1 0x00007fd32e42c3d6 in QWaitCondition::wait(QMutex*, unsigned long) () at /usr/lib/libQt5Core.so.5
      #2 0x00007fd32e427ddc in () at /usr/lib/libQt5Core.so.5
      #3 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #4 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #5 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 4 (Thread 0x7fd30c941700 (LWP 4579)):
      #0 0x00007fd32d90affd in poll () at /lib/libc.so.6
      #1 0x00007fd327616a04 in () at /usr/lib/libglib-2.0.so.0
      #2 0x00007fd327616b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
      #3 0x00007fd32e643e9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #4 0x00007fd32e5f1bba in QEventLoop::exec(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #5 0x00007fd32e426d7c in QThread::exec() () at /usr/lib/libQt5Core.so.5
      #6 0x00007fd31928e975 in () at /usr/lib/qt5/plugins/platforms/../../../libQt5DBus.so.5
      #7 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #8 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #9 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 3 (Thread 0x7fd31758e700 (LWP 4578)):
      #0 0x00007fd32d90affd in poll () at /lib/libc.so.6
      #1 0x00007fd321f3f892 in () at /usr/lib/libxcb.so.1
      #2 0x00007fd321f415e7 in xcb_wait_for_event () at /usr/lib/libxcb.so.1
      #3 0x00007fd31953eda9 in () at /usr/lib/qt5/plugins/platforms/../../../libQt5XcbQpa.so.5
      #4 0x00007fd32e42b6e9 in () at /usr/lib/libQt5Core.so.5
      #5 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #6 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 2 (Thread 0x7fd31a1f7700 (LWP 4577)):
      #0 0x00007fd32e16d5cf in pthread_cond_wait@@GLIBC_2.3.2 () at /lib/libpthread.so.0
      #1 0x00007fd32de946bc in gthread_cond_wait (mutex=<optimized out>, cond=<optimized out>) at /buildsys/core/gcc/src/gcc-build/x86_64-unknown-linux-gnu/libstdc++-v3/include/x86_64-unknown-linux-gnu/bits/gthr-default.h:864
      #2 0x00007fd32de946bc in std::condition_variable::wait(std::unique_lock<std::mutex>&) (this=<optimized out>,       lock=...) at /buildsys/core/gcc/src/gcc-5-20170214/libstdc++-v3/src/c++11/condition_variable.cc:53
      #3 0x00007fd32622e30e in () at /usr/lib/libQt5WebKit.so.5
      #4 0x00007fd32622e429 in () at /usr/lib/libQt5WebKit.so.5
      #5 0x00007fd32de99850 in std::execute_native_thread_routine(void*) (__p=<optimized out>) at /buildsys/core/gcc/src/gcc-5-20170214/libstdc++-v3/src/c++11/thread.cc:84
      #6 0x00007fd32e167494 in start_thread () at /lib/libpthread.so.0
      #7 0x00007fd32d9146ff in clone () at /lib/libc.so.6

      Thread 1 (Thread 0x7fd31a23dd00 (LWP 4576)):
      #0 0x00007fd32d90affd in poll () at /lib/libc.so.6
      #1 0x00007fd327616a04 in () at /usr/lib/libglib-2.0.so.0
      #2 0x00007fd327616b0c in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0
      #3 0x00007fd32e643e9f in QEventDispatcherGlib::processEvents(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #4 0x00007fd32e5f1bba in QEventLoop::exec(QFlags<QEventLoop:😛rocessEventsFlag>) () at /usr/lib/libQt5Core.so.5
      #5 0x00007fd32e5f9be4 in QCoreApplication::exec() () at /usr/lib/libQt5Core.so.5
      #6 0x000000000041377e in main(int, char**) (argc=2, argv=<optimized out>) at /buildsys/apps/calamares/src/calamares/src/calamares/main.cpp:71

      This was when try to install in manual partition
      offline

      Failed to unpack image /bootmnt/kdeos/x86_64/root-image.sqfs

      rsync failed with error code 13.

      online installation

      Error Boost.Python en el proceso "bootldr".

      <class 'subprocess.CalledProcessError'>
      Command 'grub-install /dev/sda' returned non-zero exit status 1.
      Traceback:
      File "/usr/lib/calamares/modules/bootldr/main.py", line 215, in run
      install_bootloader(boot_loader, fw_type)

      File "/usr/lib/calamares/modules/bootldr/main.py", line 201, in install_bootloader
      check_target_env_call(["grub-install", install_path])

      File "<string>", line 2, in <module>

      tryin to encrypt partitions

      Error Boost.Python en el proceso "bootldr".

      <class 'subprocess.CalledProcessError'>
      Command 'grub-install /dev/sda' returned non-zero exit status 1.
      Traceback:
      File "/usr/lib/calamares/modules/bootldr/main.py", line 215, in run
      install_bootloader(boot_loader, fw_type)

      File "/usr/lib/calamares/modules/bootldr/main.py", line 201, in install_bootloader
      check_target_env_call(["grub-install", install_path])

      File "<string>", line 2, in <module>

      sorry for the mess, just first sentence in code mode. ...

      You can edit your post, when its still the last one.

      First Wayland minimal ISO is up.
      For testing the nvidia 340xx (not regular nvidia) non-free drivers are included, but remember non-free cannot run a Wayland session (neither can vbox). Just smplayer is added to make sure media files can be tested.

      This time locally build (not the usual way of using the buildserver) and uploaded from a cellphone to Google Drive, so a different link:
      https://drive.google.com/file/d/0B4zqaLJm6uSAelBBbTh4Zk1fbms/view?usp=sharing

      Anyone wanting to install the above first Wayland ISO, you will need to get a bug fix for Calamares to do so, Live mode run:

      sudo pacman -U http://kaosx.tk/repo/build/calamares-3.1.0.5-1-x86_64.pkg.tar.xz http://kaosx.tk/repo/build/calamares-debug-3.1.0.5-1-x86_64.pkg.tar.xz

      this will fix an error in userkf5 module you might have seen.

      What could be the final version for both ISOs is now uploaded.
      Big change for both is the move to KDE Apps 17.04RC, which no longer includes separate language packs. Those are now part of each individual application, so both the full X ISO and the Wayland version will have the needed locales for all.
      Kernel also updated one more time, linux 4.10.9 should be the next stable kernel.

      Please test this ISOs for if no issues are found then these will be released in 2 days as the next stable:
      https://sourceforge.net/projects/kaos-test/files/iso/
      Full X ISO:
      https://sourceforge.net/projects/kaos-test/files/iso/KaOS-2017.04.09-x86_64.iso
      Limited Wayland ISO (just the plasma desktop, minimal apps, no printer packages, office suite, etc):
      https://sourceforge.net/projects/kaos-test/files/iso/KaOS_Wayland-2017.04.09-x86_64.iso

      Hi, here are the logs

      kaos wayne
      erase disk option
      https://pastebin.com/vyrMGSAL
      phyton error and freeze
      https://pastebin.com/mq0uRfrU

      manual option
      https://pastebin.com/dGfpsBmD
      phyton error and freeze
      https://pastebin.com/JDzMY4j1

      kaos x 20170405
      calamares
      https://pastebin.com/DjJS16Gg
      erasedisk option
      https://pastebin.com/5txWsVhX
      manual option
      https://pastebin.com/vpqp80CD

      kaos x 20170409
      phyton
      https://pastebin.com/cMcvRKr9
      erase disk option
      https://pastebin.com/yJGJnJSF
      manual option
      https://pastebin.com/9GGMnrnR
      manual option again (without invalid characteres, can not copy it)
      https://gist.github.com/anonymous/11e024468902dedc8dcdd5222aaa63d0